简单的密尔沃基M12电池接口

Simple Milwaukee M12 Battery Tap

2024-04-16 09:18:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I had originally remixed a Milwaukee torch to make a battery tap and that worked well but it was much more complicated than it needed to be. The switch which I thought was handy is just as easily unplugged when not in use. So this time around I wanted something simple and easy to make. With 2 spade connectors and an XT60 connector, you can make your own. Or use this design within another project that you're M12 powering.

Slots for the spade connectors are purposely very tight. May require persuasion using a soldering iron to get them in place.

The tolerances using my Ender S1 prints it perfectly snug but you may want to scale +-1% to get it snug.