密尔沃基 PackOut 深度组织盒 - 全高设计 - 无分隔板

Milwaukee Packout Deep Organizer Bins - Full Height - No Dividers

2024-03-18 08:07:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Since I have already duplicated the:
Milwaukee Packout Low Profile Organizer bins and the
Packout Organizer Square bin and the
Packout Organizer Rectangular bin

I was asked to create bins for the Milwaukee Packout Deep Organizer. I figured, why not, so I gave it a shot.

These were definitely more of a challenge than just duplicating the other Milwaukee Packout Organizer bins. There were no bins to duplicate, and the bins that I saw online did not conform to the sides of the individual cavities, but just squared off the inside shape and a lot of the available volume was lost. I figured I would try to make available for storage as much of the internal volume as possible, which led to the "fun" of the design - replicating and offsetting all of the curves, angles and drafts of the case.

Well, some of the designs took a lot more iterations than I thought they would, but here they are.

The walls are designed to be 0.08" (2.03mm) thick, and the bottom is 0.12" (3.05mm) thick.

The "M" designator just means it is a mirrored part, since I only designed the right side bins.

The "FH" stands for full height bin, since I was also asked to make variations of these that are 1/2 height, and maybe 1/3 height as well.

The "ND" standa for no dividers. I may also make these in the different heights to have removable dividers. At this point, I am not sure how many dividers, but they will unfortunately have to be unique to each bin, since each cavity has different dimensions.

The "--?" indicates the iteration of that model. For "--C", it is the fourth iteration, since I start at ---, then --A, --B, --C. . .