Ortur LU2-4-SF 双气助喷嘴 3D模型

Ortur LU2-4-SF Dual air assist nozzle

2023-06-27 17:36:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This air assist nozzle is designed to fit my Ortur Lasermaster2 with LU2-4-SF laser module.
It will help to blow away any fumes and carbon builtup around the laser cut area.

Parts needed for assembly:

90 degree M5 pneumatic pipe connector
PUR pneumatic pipe with a 4mm outside diameter.
4x Rounded head M3x12 bolts
4x M3 nuts

Please use responsebly and test if your laser does not hit the inside of the plastic nozzle.
Not doing so can result in fire or laser beams shooting in unforeseen directions!
So be carefull!

Print Settings

Printer brand:
Creality
Printer:
Sermoon D1
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.4
Infill:
4-5 walls, 25% infill
Filament brand:
123-3D.nl
Filament color:
White
Filament material:
PLA
Notes:
Make sure to use a light fillament color in order to reflect as much light as possible.

Disable supports everywhere!!, and set support to "only touching build plate" instead.