ESUN线圈盒墙架支撑
ESun Filament Box Wall Brackets
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Wall brackets for ESun filament boxes. Prolly would work with any box, they are 8.25x8.25x3.5 inches. Tested to hold 20lbs. Why would anyone want this?
Wrap the boxes in some duct tape for extra strength. Or just tape them to the wall, makes more sense than printing these.
Uses like 120g of filament for all the pieces, around 14 hours to print at 50mm/s.
So thats like $3 for the filament and electricity to run the printer. This design is pointless.
Crackle crackle, RIP Dan
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Rafts:No
- Supports:No
- Resolution:.2 works, could do more or less, dont matter
- Infill:99%
- Filament brand:
ESun
- Filament color:
Black
- Filament material:
PLA+
- Notes:
I used ESun PLA+ to print, other types would most likely work.
15 Walls
15 Top
15 Bottom
99% Infill
No Supports, Turn it on its side so the diagonal part is flat on bed
The 4mm support rods arent necessary.
With those settings 20lbs is no problem.
This design is pointless.
License
ESun Filament Box Wall Brackets
by iHeartSteelTubes is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
最新模型
-
Wii 遥控器（同步按钮）3D模型2024-05-08 -
Toa Metru用于桌面模型开发2024-05-08 -
Sunlu FilaDryer S1 Plus气压计安装支架2024-05-08 -
Nylint 更换屋顶组件2024-05-08 -
3D打印机导线存储架2024-05-08
最热下载
-
沃帕尔六足行走机器人2023-03-26 -
原始控制舱2024-03-25 -
Wolf系列手机支架2024-03-26 -
3D模型标题1：kp3s orca slicer2024-04-07 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14