eSun 纸板制品车间模型
eSun Cardboard Spool Centre
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
If you find my designs useful, please consider sending a tip
Remix of my CopyMaster spool Centre to fit eSun carboard spools.
eSun filament on cardboard spools have hollow centres.
This means, for those of us with bearing-based filament holders, there's nothing inside the spool to rest on the bearings.
The filament is always under tension and being pulled off the roll rather than unwound.
This simple insert means your eSun spools will rotate freely again without tension on the filament.
UPDATE: Added a 84mm version as I found sometimes the spool can work its way off the end of the tube as there's only a few mm sticking out.
(I am not affiliated with eSun, I just use their PLA)
Print Settings:
Quality: 0.2
Infill: 20%
Brim: Yes (Personal Preference)
Supports: No
Material: PLA
Tags
相关内容
联系我们
热门推荐
-
俄罗斯套娃谜题迷宫盒子2023-03-26 -
DIY制作NP-F750/970电池：由18650电池制成2023-09-10 -
FSU - Osceola和Renegade站在小台子上 - Florida State2024-01-13 -
Mobula 6盒3D模型2024-01-17 -
Skytrak保护壳2024-03-25
最热下载
-
未识别十字架006A，可嵌入盒（v2）2023-03-26 -
吸血鬼之夜2024-01-15 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
泰坦电视核心升级，升级版泰坦巨人核心2025-07-16 -
用于Raspberry Pi高质量摄像头的D型安装适配器2024-05-08
最新模型
-
摄像机装备2024-05-08 -
Fcm书签2024-05-08 -
T-28 鼓鼻减重架加固2024-05-06 -
Jenga盒子2024-05-06 -
经典俄罗斯方块2024-05-06