3dsjs

创邦 F430 和 F160 主风管

CreatBot F430 and F160 Main Fan Duct

2024-01-08 21:08:03

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

CreatBot Fan Duct that is made to correct size!!

Came across many of these ducts that have not being desinged to suit the CreatBot.
The shell is to thin and you are unable to print them correctly.
This one prints without the fan just fine or with a custom aluminium foil duct.

Print Settings

  • Printer:

    CreatBot F430

  • Rafts:
    Yes
  • Supports:
    Yes
  • Resolution:
    1:1
  • Infill:
    20%
  • Filament brand:

    Any

  • Filament color:

    Any

  • Filament material:

    ABS, POLY ePC, NYLON

  • Notes:

    ABS: 250C at 86C Bed Temp
    Rafts: Yes (6mm)

    NYLON: 276C at 120C Bed
    Rafts: Yes (2mm/6mm)

    POLY ePC: 290C at 140C Bed Temp
    Rafts: Yes (6mm/10mm)

Tags

License

CC BY-NC-SA

CreatBot F430 and F160 Main Fan Duct
by DaVincisCodex is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

创邦 F430 和 F160 主风管
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

猜你喜欢