ENDER 3/PRO/MAX FILAMENT SENSOR TOP MOUNT

2023-05-11 01:10:38

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

ENDER 3/PRO/MAX FILAMENT SENSOR TOP MOUNT

Summary

NEW VERSION FINISHED, USE INSTEAD!!!(8/12/2023)
as noted below there can be kinking and binding issues with this design if using it on larger printers, version 2 eliminates this issue with the inclusion of a bearing and will be linked here----> https://www.thingiverse.com/thing:6167092 <--- when prototyping is finished. version two will mount to the printer and filament sensor the same way as the original though there will be three different parts and some fitting or super glue may be needed

I could not find a nice compact mount for my direct drive converted Ender 3 Max so I worked this up. the mount attaches to the top 20mm aluminum extrusion with T-nuts and requires four M3 nuts to secure the filament runout sensor to the mount. initial install will seem like a tight squeeze but space is allotted for the nuts between mount and aluminum extrusion.

WARNING I HAVE NOTICED ON MY ENDER 3 MAX THAT WHILE PRINTING AN ITEM THAT UTILIZES THE FULL ZED AXIS THAT SOME FILAMENT BINDING MAY OCCUR, i have not tested on my ender 3 pro as it is not currently setup for direct drive.