Ender 3 KE支架用于官方灯光条 - 灯具固定器

Ender 3 KE Bracket for Official Light Bar - "Lamp Holders"

2024-05-06 05:09:39

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The light bar I ordered from Creality was missing the two "lamp holders" or "brackets" on either side, so I did what any good 3d printing nut would do and just designed/printed my own instead of bothering to return/replace it!

The original bracket only uses two of the 3 top screws, but this design has holes for all 3. You can chose to use 2 for the bracket and leave one in the original hole because it's screwed in flush - or you can screw all 3 into the bracket, up to you, Just make sure not to over-tighten anything as the threads aren't super durable on the printer.

This is the first print I've designed/published myself so go easy on me XD

I referenced both:
https://www.thingiverse.com/thing:5887237
and
https://www.thingiverse.com/thing:6368223
in order to design this part - so thanks to both of those creators!

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V3 KE
Rafts:
No
Supports:
Doesn't Matter
Resolution:
.2
Infill:
30-40% adaptive cubic
Filament brand:
Overture
Filament color:
space grey
Filament material:
I used PLA but PETG/ABS/ASA probably better options
Notes:
If you print it "upside down" (with the longest flat side on the print bed) you won't need any supports, but you can print it on it's side with supports if you'd prefer a different finish and slightly better strength (not that it's really needed for something so light.)