Ender S1 65度显示架
Ender S1 65 Degree Display Bracket
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a remixed idea based off of:https://www.thingiverse.com/thing:6150906
This allow mount moves the Ender 3 S1 display to the front of the printer at 65 degrees. The display cable has just enough length to move to this location, but exercise care when moving the display.
This will condense the foot print of the printer for use in an enclosure. I personally preferred the angle of the display user-interface much better now.
My settings below are what i used and most likely are overkill.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 S1
- Supports:Yes
- Resolution:0.12
- Infill:30.0
- Filament brand:
Creality
- Filament color:
White
- Filament material:
PLA
- Notes:
I highly recommend this be printed in PETG for long term use. I used PLA just to see how long it will hold up.
Post-Printing
Tags
License
Ender S1 65 Degree Display Bracket
byBloodTreeis licensed under theCreative Commons - Attribution - Non-Commercial - Share Alikelicense.
相关内容
猜你喜欢
联系我们
最新模型
-
苍井空老师全身像2025-06-26 -
手电筒支架2024-05-08 -
偏移适配器 for BTT SKR 3 EZ on Ender 5 Plus2024-05-08 -
塞勒斯尼亚锁扣2024-05-06 -
垃圾桶固定扣2024-05-06
最热下载
-
Kumonga的孩子与澳大利亚蜘蛛驯兽队2024-03-17 -
空客操纵杆配备控制杆固定装置2024-03-30 -
7英寸HDMI显示器-B外壳2024-04-01 -
罗宾：不公正22024-04-07 -
Ubiquiti UniFi AC Pro 无线接入点支架2024-04-21