保时捷968型号前置和（敞篷）后置 4英寸扬声器支架
Porsche 996 front and (cabriolet) rear 4" speaker brackets
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Front and rear (cabriolet only) speaker mounting brackets for the Porsche 996
Print Settings
- Printer brand:
Bambulabs
- Printer:
Bambu P1S
- Rafts:No
- Supports:Yes
- Infill:20%
- Filament brand:
CC3D
- Filament color:
Black
- Filament material:
PC
- Notes:
Remixed the front speaker brackets so supports are only needed on the two-hole mount.
Cut a notch in the design so to the brackets fit the rear speakers in the cabriolet.
Used Kenwood KFC-S1066 2-way speakers front and rear - just break the four tabs off each speaker, and the speaker will press fit into the bracket.
Also used wiring adapters, because easier.
Speakers (as of March, 2024):
https://www.amazon.com/dp/B09MVDBZZ7?psc=1&ref=ppx_yo2ov_dt_b_product_detailsWiring adapters:
https://www.amazon.com/dp/B0BWYYSN8Q?psc=1&ref=ppx_yo2ov_dt_b_product_details
License
Porsche 996 front and (cabriolet) rear 4" speaker brackets
by keith1010 is licensed under the Creative Commons - Attribution license.
联系我们
热门推荐
-
双头螺栓卡车连接接口磁吸式外壳2023-09-11 -
Mobula 6盒3D模型2024-01-17 -
L频段反向螺旋馈源用于气象卫星接收2024-04-15 -
达·芬奇自支撑桥3D模型2024-04-15
最热下载
-
未识别十字架006A，可嵌入盒（v2）2023-03-26 -
Toyota 22RE发动机扩展套件2023-03-26 -
苹果 HomePod mini壁挂装饰2024-03-19 -
Dado - 立方体模型2024-03-24
最新模型
-
3D Pokemon 卡牌盒2024-05-08 -
玻璃研磨机第二版本2024-05-08 -
sourceone v5 HGLRC M100 5883 支架2024-05-06 -
2015年F-150中控台组织架构，带折叠中间座椅2024-05-06
