ICS SA80手枪握把

ICS SA80 pistol grip

2024-04-10 17:59:50

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a pistol grip for the airsoft sa80 replicas made by ICS. I've made this because i wanted to create a full black L85 for my own use.

Make sure to print with extra perimeters as the screw will grip onto the material itself. It might be somewhat tough to get the screw in so perhaps using a power tool might be useful to get it going for the first time. There might be a possibility that some material will be pushed away by the screw, as long it grips well it shouldn't be a problem.

I hope you like it!

Print Settings

Printer brand:
Prusa
Printer:
i3 MK4
Rafts:
No
Supports:
Yes
Resolution:
as high as you can go
Infill:
at least 10%
Filament brand:
prusa
Filament color:
petg CF
Filament material:
petg
Notes:
Please make sure to add extra perimeters to ensure the screw doesn't break and does have enough material to grip onto!

Post-Printing

How I Designed This

I started with the sa80 pistol grip by Saxonite but quickly found out that not only was it a uncomfortable model to hold it was also never going to fit on an ICS airsoft replica of the sa80. I've adjusted the shape a bit with blender to fit the ICS receiver, smoothed the model and made it much more comfortable to hold. As I'm somewhat rusty with modeling i guestimated the diameter of the screw hole for assembly. I then redid that part in tinkercad for more surface for the screw to hold onto.