Genelec 8010型号的支撑架，用于Isopod固定装置的安装板，由reuank公司提供。

Genelec 8010 stand for Isopod Mounting Plate by reuank

2023-06-27 22:14:00

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

抖音私信 @jobsfan

A simple desktop stand for the Genelec 8010 Isopod Mounting Plate made by Leon K.

The print doesn't need supports and prints well at 0.2mm and 15% Gyroid infill.

I choose to print the thread part solid and at 0,07mm. (If you don't want to do that, just ignore the babble below ;-)

In PrusaSlicer you can do this as follows:

Then:

Right-click on the stand and select Split->To parts
Select the thread in the right panel
Click the grear-icon and select Infill
Then, in the Part settings below set:
- Fill density: 100%
- Fill pattern: Rectilinear

Next, click the Variable layer height icon in the top menu bar

Left-click-and-hold your mouse at the top horizontal marker in the bar on the right and
drag-and-hold the mouse all away to the top to increase the thread details to 0,07mm

That's all ;-)

Stand Dimensions
Height: 15mm / 0.59"
Width: 10mm / 0.39"

Mounting Plate Dimensions
Height: 7.5mm / 0.30"
Width: 9mm / 0.35"