Globe City

2023-06-28 01:23:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

When I started 3D modelling 20 years ago, I started working on a city-like structure mapped onto a sphere. I never finished it, but as a tribute to what I created back then, I made this new 'globe city' and tried to print it.

The print is a bit rough and stringy (I had not discovered the wipe option yet), but it was a nice challenge to get to know my printer. It is kinda nice to touch. It is a bit fidgety.

I am not really sure why the STL-preview won't load though. It seems to load fine in PrusaSlicer 2.6.0.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
Yes
Resolution:
0.4 mm nozzle + 0.24 mm layer height
Infill:
15% adaptive cubic
Filament brand:
Fiberlogy
Filament material:
PLA
Notes:
I printed the design at 50% and only as a draft so far. This attempt was with two halves, which leaves a nasty seem all around the object. So you would probably want to print it in slightly more detail, as a single object and slightly bigger. That should also make the removal of support material easier.