手工焊接的Kyria分开式键盘

Handwired Kyria Split Keyboard

2023-06-28 01:23:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

手工焊接的Kyria分开式键盘

手工焊接的Kyria分开式键盘

Summary

A handwired version of the kyria keyboard by splitkb.com

A split ergonomic keyboard with 50 keys and a columnar layout.

Github: https://github.com/MoltenZaz/Handwired-Kyria

Needed parts:

3D printed case (mirror provided stls for right side)
50x keyboard switches of your choice (I used durock L7 67g)
50x 1N4148 diodes
2x 4 pin XS6 mini Aviation plug & socket (https://www.aliexpress.com/item/1005004089293971.html)
2x Waveshare RP2040-Zero Microcontrollers (https://core-electronics.com.au/rp2040-zero-a-pico-like-mcu-board-based-on-raspberry-pi-mcu-rp2040-mini-ver-1.html)
wire for connecting switches to microcontrollers, I used stranded alarm wire (https://www.jaycar.com.au/4-core-alarm-cable-sold-per-metre/p/WB1590?pos=2&queryId=16eeb7069ed69f201332ceafd4c163ac)
4 core cable for connecting both halves, I used the same alarm wire mentioned previously
Keycaps of your choice, I used blank pbt oem.
30x m2 6mm heatset inserts (https://www.aliexpress.com/item/1005005220632314.html)
30x m2 6mm countersunk screws (https://www.aliexpress.com/item/1005003986879500.html)

Optional but highly recommended:

50x hotswap sockets (https://www.aliexpress.com/item/1005004290562374.html)
paracord for sleeving the cable
magnetic usb c cable (https://www.aliexpress.com/item/1005005402419615.html)
heatshrink
rubber feet (https://www.aliexpress.com/item/1005003412490420.html)

Notes for building:

if using hotswap sockets solder on the bottom for the switches under the microcontroller! the tolerance is tight!
put electrical tape on the switches under the microcontoller
the xs6 connector is used to wire the microcontrollers together, you need to wire GP0-GP0, GP1-GP1, 3.3v-3.3v, Ground-Ground. Make sure you are wiring it correctly and check with a multimeter, make sure that they aren't shorting to each other as it is quite a small connector.
the cable and paracord that I used was very tight in the connector, to make it fit easier I used a pair of scissors to scrape the cable rubber sleeving and make it as thin as possible without removing the sleeving
I found it difficult to solder the sx6 connector on the cable side because of its size, take your time and try to put heatshrink around each solder point to avoid accidental shorts
it is better to use a more flexible wire so that it's easier to jam the microcontroller into it's slot, originally I used solid core wire and it was difficult to get the microcontroller in
print the test prints to check tolerances and your print settings before printing the full case
I used angled tip pliers to put the nut on the xs6 socket, I didn't want to make that section of the case any thinner because when I was testing with white filament it would have become transparent
The reason that I used the xs6 connector is that trrs is not hotplug safe and the xs6 mini was the smallest suitable connector I could find and as a bonus it's a pretty cool connector

Firmware notes:

I have included my qmk files on github, my keymap is probably more complicated than you want I recommend looking through my layout then either modifiying it to your liking or making your own
I'm using EE_HANDS to determine the side of the split so when flashing select the uf2-split-left bootloader for left and uf2-split-right for right. For example to flash the keyboard I use the command "qmk flash -kb handwired/kyria_mt -km mitchell -bl uf2-split-left" and "qmk flash -kb handwired/kyria_mt -km mitchell -bl uf2-split-right" in qmk msys

Print Settings

Printer brand:
Creality
Printer:
Ender-3 Max
Supports:
No
Resolution:
0.2mm
Infill:
100%

Tags

ergonomic keyboard kyria mechanical keyboard split keyboard

License

CC BY

Handwired Kyria Split Keyboard
by MoltenZaz is licensed under the Creative Commons - Attribution license.

手工焊接的Kyria分开式键盘

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

通用型1/10比例底盘 - DKS基础款
2023-03-26
替换式膨胀喷嘴，适用于FLEXTAILGEAR小型泵。
2024-03-18
Dyson V6系列3D模型适配器站
2024-04-15
FFBeast仿真飞行器模拟轮部件
2024-04-19
JeNo 3" Cage DJI O3 + Bras + Lipo Protection + Bumper 40°
2024-04-19

最新模型