无线控制器多元化V型天线支架 Futaba
RC Diversity V Antenna Mount Futaba
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
My Futaba R7106SB has 3mm round sections on the antenna cables so it was incompatible with the diversity mounts I could find on here.
This mount will work for that receiver and any others that have this larger diameter.
The antennas are oriented so that one is in the vertical polarisation in the hover/level position and the other is vertical at a 35° tilt (typical for a drone in flight). The mount should accordingly be mounted so that the angled tube is pointing toward the rear of the vehicle.
You might need to run a 3mm or 3.5mm drill through the antenna holes. I used a tiny spot of silicone to keep the antennas in the mounting holes.
No supports needed for printing.
Tags
License
RC Diversity V Antenna Mount Futaba
by Brodo78 is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
二战时期德国的可移动防弹室3D模型2023-03-28 -
自由下垂的颌骨头骨模型作为支撑物2023-04-15 -
1U模块化19寸服务器架，适用于Pi或Keystone2023-05-10 -
基茨雷廷胡特纳山非营利组织钥匙扣配以卡通币设计2024-03-24 -
300毫升Marinelli型号试管，适用于Radex Obsidian2024-04-04
最热下载
-
Glock 17/34 Solidworks 模型文件2023-04-21 -
Gun4IR 光枪侧边按键改装模块｜3D打印机械开关支架2023-05-23 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
适用于ebyte E104-BT5040U USB适配器的外壳2024-04-28 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
龙珠孙悟空，无需支撑2025-07-19 -
3d打印的男人凉鞋2025-07-17 -
性感美女3d人像（带基座）2025-07-17 -
高跟鞋鞋架2025-07-17 -
大码动漫女战士2025-07-15