项链飞跃2号可逆式快装支架，适用于虚拟主播、测试及扩展现实应用等场景。
Necklace Leap 2 reversible snap-in mount for Vtuber, testing, XR apps, etc
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
For use with the Leap Motion Controller 2 by Ultraleap:
https://leap2.ultraleap.com/leap-motion-controller-2/
The controller snaps into the mount in either direction. Allows for adjustability of the angle of the camera. Comes in medium and large sizes.
Mount and necklace fasten together, but friction fit is enough to test with. An M5 bolt between 16-20mm long and matching M5 nut to be used to secure the 2 parts. A standard gopro mount thumb screw works too.
The orientation of device can be changed in the Ultraleap software control panel.
Print Settings
- Rafts:No
- Supports:No
- Resolution:0.15mm
- Infill:50%
- Filament brand:
Prusament
- Filament material:
PLA
License
Necklace snap in mount for Leap Motion Controller 2
by Ultraleap is licensed under the Creative Commons - Attribution license.
相关内容
猜你喜欢
![肥皂架 / Seifenhalter [适用于Wenko真空吸力装置]](https://www.3dsjs.cn/api/utils/resourcehub?time=1751251551&url=http%3A%2F%2Flocalhost%3A9898%2Fsandsjs%2Fimage%2F9%2Ff%2F9f844941c763cb70ba7abf3d882ebdff.webp&signature=8b05ac99582d8652503c0794b3c122ab)
联系我们
最新模型
-
苍井空老师全身像苍井空跪姿2025-06-27 -
PS4轻型版桌下挂架2024-05-08 -
Taco Bell国际象棋套装：车子棋子2024-05-08 -
装饰艺术风格灯罩适用于GRÖNÖ灯2号2024-05-06 -
X轴清洁：Prussa/Mendel打印机维护技巧2024-05-06
最热下载
-
未识别十字架006A，可嵌入盒（v2）2023-03-26 -
红米手表4号充电基座2024-03-15 -
Woods Mower 30922 护盾保持者2024-04-24 -
超越IPD板2024-05-03 -
线框无心2024-05-08