.38 特殊快装容器
.38 special snap-caps
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
A model of a .38 special round. For use as a display piece, prop, or snap-cap.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:Yes
- Supports:No
- Resolution:.28
- Infill:10%
- Filament brand:
creality
- Filament material:
pla
- Notes:
I use a raft and draft shield. But, that is probably not necessary.
If you are printing these as props or for display, a higher resolution may be a good idea, but I find the "low quality" setting in Cura to be good enough for use as snap-caps.
For infill, I typically use 10% on gyroid.
How I Designed This
Research
I used the SAAMI specs for the dimensions of the shell.
The specs call for a bevile on the bottom of the rim, however, this caused some fitment issues, so I changed it to a right angle.
Tags
License
.38 special snap-caps
by Z6197 is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
特斯拉 Mini 3 Pro 无线遥控自行车支架2023-03-26 -
罗霍卡佩模型2023-05-20 -
乌克里乐五声音阶结构模型2024-03-19 -
Elegoo Phecda 十字光标激光模块与空气辅助管支架2024-04-06 -
创业2024-04-24
最热下载
-
CoreXY框架（v2.0）2023-03-26 -
替换式膨胀喷嘴，适用于FLEXTAILGEAR小型泵。2024-03-18 -
原始控制舱2024-03-25 -
7英寸HDMI显示器-B外壳2024-04-01
最新模型
-
Wii 遥控器（同步按钮）3D模型2024-05-08 -
野马Mach 1雾灯支架模型2024-05-08 -
瑜伽垫固定挂钩2024-05-08 -
奇迪Q1 Pro顶端版2024-05-06 -
欧乐B牙刷架，适合两支牙刷2024-05-06