防鸟尖顶

Bird spikes for plastic gutters

2023-07-22 19:14:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I designed these bird spikes to stop the larger birds landing on our gutter. The main spikes are vertical (the photo was taken at an angle). The angled spikes that face in towards the roof are to stop the birds walking down the roof and pecking in the gutter. They slot over the outer edge of the plastic gutter. I first printed them in PLA as a test but they softened in the heat of the sun and became loose, so I recommend using PETG. I've used ones printed in PETG for over a year and they work well and have withstood strong winds, rain and the summer sun. The long row of spikes can be printed on a 220mm x 220mm bed. Print as many as you need for the area of gutter you want them on. The medium and short rows of spikes are used to fill the the gaps near the gutter brackets and bends where the long row can't fit They are easy to slot in place and remove (if you need to clean the gutter) as long as you can access the gutter. Please be careful leaning out of windows or climbing ladders. Don't over reach.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament brand:
Any
Filament color:
Any
Filament material:
PETG
Notes:
I used a 0.4mm nozzle. I only needed support under the gutter slots as per the green areas in the slicer image. If you have an issue printing the angled spikes you could add support but it will take longer to print. If you have issues with warping or bed adhesion then you might need to use a brim around the print. Try printing the small row first.