3dsjs

氯化生成器模型

The Chlorinator

2024-04-24 09:27:12

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

Printed on a Bambu Labs P1S.
Material - ASA
Float - 10% infill
Dispenser - 30% infill
Flow cap - 50% infill

Dispenser will screw into the float and the flow cap snaps on to the dispenser. The flow cap is a snug fit, might have to sand a little and give it a few smacks should snap into place.
Dispenser screws/unscrews into float to fill with chlorine. Fits 1 inch hot tub chlorine tabs.

Print Settings

  • Printer brand:

    Bambulabs

  • Printer:

    Bambu P1S

  • Rafts:
    No
  • Supports:
    No
  • Resolution:
    0.2
  • Infill:
    50%,30%,10%
  • Filament brand:

    Polymaker

  • Filament color:

    Natural

  • Filament material:

    ASA

Tags

License

CC BY-ND

The Chlorinator
by messy-messer90 is licensed under the Creative Commons - Attribution - No Derivatives license.

氯化生成器模型
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢