3D模型：站立波生成器
Standing Wave Generator
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Project developed to teach about standing waves in high school physics classes, feel free to modify and improve.
As my printer is not very big, I divide the pieces, to join the pieces together, you can use two-component glue or even adhesive tape.
The electronic part is not necessary, just make both motors be turned on in opposite directions to work
If you want to make the circuit, I'm making the project's Tinkercad available.
https://www.tinkercad.com/things/a1RiyQrt7XJ-pseudo-pwm-ne555
A TIP31C (NPN) transistor was used, but you can use another NPN of your choice, as long as it supports the motor current. The project shows only 1 motor, to add 2 motor, simply connect their transistor bases.
I placed the image of the circuit assembly both on the breadboard and on a universal board
Print Settings
- Printer brand:
Anycubic
- Printer:
i3 Mega
- Rafts:Doesn't Matter
- Supports:No
- Resolution:0.2
How I Designed This
Tags
相关内容
联系我们
最新模型
-
康福特沃恩轮毂保护套2024-05-08 -
劳拉的基础模型2024-05-08 -
Nest摄像头电源支架2024-05-06 -
法基尔2024-05-06 -
sourceone v5 HGLRC M100 5883 支架2024-05-06
最热下载
-
六棱锥形微小叶片 - 六叶模型2023-03-26 -
Kumonga的孩子与澳大利亚蜘蛛驯兽队2024-03-17 -
免费蜘蛛侠头像STL模型，适合3D打印2024-03-24 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14
