可叠放式SSD托盘（带盖，前置接口）

SSD Stackable Tray with lid (Front ports)

2023-07-22 19:41:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a stackable tray to hold SSD hard drives. The base of the tray has four holes for screwing the SSD into the tray (v1) or it can be used as a base with the holes used to screw down into a permanent position.
Version 2 (v2) has small studs in place of the screw holes. These allow you to hold an SSD is place quite firmly without needing to use screws. In my testing I can hold the tray upside down without the SSD falling out, though it definitely holds when vertical.
A matching lid is also included as well as a lid with cutouts if desired.

A full-size HDD version which also supports SSDs and includes a separate lid and base and allows for mounting 120mm cooling fans can be found here ...
https://www.thingiverse.com/thing:6114929 (ports in)
and here ...
https://www.thingiverse.com/thing:6133437 (ports out)

An alternative version with the SATA ports facing "in" can be found here ... https://www.thingiverse.com/thing:6114918

I printed mine with the following settings...
... Material: PLA
... Layer height: 0.2mm
... walls: 2
... Infill: 10%
... Rafts: None
... Supports: None