角度笔架（可叠放）

Angled Pen Rack (Stackable)

2024-04-24 12:05:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Wanted to be able to store pens "optimally", and prevaling wisdom is with the tip slightly lower, but closer to flat. So this lets you choose your angle (10 degrees by default), as well as the number of pens it stores. I also gave it some bits so it stacks well, and tried to make it as parameterized as possible.

For some reason OpenSCAD doesn't seem to do rotations quite perfectly, so make sure you force the bottom to be the bottom before printing. You could probably also print back-size down, which would make the holes cleaner, but would take longer and may make it not stack as well or be as rigid (untested).

Printed no brim or supports, but I was okay with a bit of uncleanliness in the pen slots. YMMV may vary based on your printer's ability to deal with arches.