XGimi 哈罗角度立架

XGimi Halo angled stand

2024-05-03 22:31:38

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The XGimi Halo is designed to be located below the screen it is projecting on.

The point is that I put mine above our bedhead, so it must be tilted.

This model offers a plate with a basic angle, plus a screw allowing to raise it at the perfect angle.
Note that a M10x1 thread has been chosen to have a precise adjustment.
A 0.2mm gap between the thread of the plate and the thread of the screw has already been set up.

Last but not least, a 1/4 inch screw is added to maintain the projector in place.

I plan to add some kind of rubber feet, but I haven't found them yet.

Cheers!