丰田低调车轮盖 适用于2012款FJ拓克苏
Toyota low profile hub cap Fits 2012 FJ Cruiser
2024-03-15 02:33:31
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I was looking at my other designs and I thought it would be a good idea to develop a hub cap with the same height and an OEM one. So, here it is. You will still probably have to slightly bend the tabs out with a heat gun and cold running water (I heat it, then adjust it, then put it under cold running water and it locks it right in. If you don't want to do that you can try upscaling it a percent or two but that may cause other issues. I will update this soon with pics on my FJ.
Print Settings
- Printer brand:
Bambulabs
- Printer:
Bambu X1C
- Rafts:No
- Supports:No
- Resolution:0.2mm
- Infill:100
- Filament brand:
Wuxn
- Filament color:
Black
- Filament material:
ABS
- Notes:
When I put the infill to 100% I change it to rectilinear too.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
Pokeball 3D模型2023-04-29 -
Gaggia Brera Coffee Machine Hopper Extension2024-03-17 -
Gloomhaven 3D模型插件：按钮和小错误2024-03-30 -
山羊/精灵族/魔鬼角 - 可拧上或穿过发丝2024-04-05 -
索尼NP-FW50电池专用外壳（10个装）2024-04-24
最热下载
-
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
Flex Dino钥匙链2023-03-26 -
拒绝的手势2024-04-19 -
Neptune 4 / 4 Pro Cura 切片配置文件与使用教程2024-05-02 -
巴黎卢浮宫的三圣母像2025-07-16
最新模型
-
丰田22RE发动机Starer电机2025-08-08 -
一体打印活动关节熊猫和支架2025-07-25 -
女式凉鞋2025-07-16 -
兔女郎半身像2025-07-15 -
苍井空老师全身像苍井空跪姿2025-06-27