帮助手桌夹具

Helping Hand with Table Clamp

2023-07-23 11:56:11

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

really loved this design as I'm getting back into soldering and was tired of trying to balance everything in place to get a good joint made. Wasn't until after I printed everything out that I realized how thin my desk was and the clamp wouldn't fit. So, I threw together a little spacer to make it fit my thinner desktop.
I managed to make this with PLA but it was a bit laborious to get everything to snap together. Also used a torch to heat the end and get the Alligator clamp in.

Print Settings

Printer brand:
Anycubic
Printer:
Kobra
Rafts:
No
Supports:
Yes
Infill:
35%
Filament brand:
Overture
Filament material:
PLA+

Tags

clamp electronics helping-hands soldering

License

CC BY

Helping Hand with Table Clamp
by DreDae is licensed under the Creative Commons - Attribution license.

帮助手桌夹具

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型