魔法卡牌存储盒（带生命值计数器）

Magic the Gathering Deckbox with lifecounter

2023-07-23 11:57:03

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

All in one Deck Box for Magic the Gathering Cards, designed for 75 or 100 sleeved cards. With extra compartment for dice and little things, and a geneva mechanism lifecounter in the lid. The locking mechanism is done with hidden cuboid magnets.

Required materials

cuboid magnets 10 x 3 x 2 mm in size. I ordered mine at supermagnete.de
glue, Cyanoacrylate based superglue works best in my opinion
a small file or sandpaper, to smooth out the lifecounter axle

How to print

i printed mine with 0.2mm resolution and a 0.4mm nozzle, using PLA filament. I used a Prusa mk3s printer, and used PrusaSlicer with mostly default configuration. In the following list i only mention parameters where i deviated from the default.

Box

Support Material, generate support material: yes
Support Material, Style: Snug
Support Material, Auto generated support: no
manually paint on support on the latch for the lid(we have to do it like this to prevent supports where the magnets are inserted)
Add a pause or color change at 51.80 for the 75 card box, or 66.80 for the 100 card box.

When the print pauses, insert the magnets, ideally all with the same magnet field orientation.

Lid_bottom

Add a pause or color change at 3.80. When the print pauses, insert the magnets. Make sure each magnets has a matching orientation to the magnets used in the box.

Lid_top / centergear

No deviation from the defaults

Maingear / numbers

There are many ways to print the maingear, i got the best looking results by printing the numbers first in one color onto the build plate, afterwards printing the gears in another color over the numbers. This is probably very printer specific, and might need some tries to get perfect results. I had to manually align the numbers with the maingear in the slicer before slicing to prevent any overlap. After printing the numbers i carefully removed all stringing before printing the gear over it.

Numbers:

Elephant foot compensation: 0
First Layer: 0.52 ( up from 0.42)

Maingear:

Extruder Lift Z: 0.6( up from 0.4, as the numbers are 0.4 mm thick already and we dont want any collisions of the nozzle with the previous printed numbers)

Assembly

Make sure the gears are running smoothly by filing down any imperfection from the print. Insert the gears on the axles, check that the gear timing is right before glueing the top lid on the bottom lid. Use only very small amount of glue.