埃波纳追踪车辆

Epona Pursuit Vehicle

2023-07-23 11:58:10

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

General Updates:

Generation 3 has arrived, this includes an auto-generating armour system and armature for posing. I will be uploading the armour assets and giving a basic guide on how to use this system for making your own variants/poses on the Patreon.
Vehicles 2.0 is here! Vehicles will now have the same armour system as 'Mechs as well as separated turrets to lower the amount of prints required (and let them spin). Variants that share the same chassis will only have different turrets rather than completely different models.

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Based on Battletech's Epona Pursuit Vehicle

Contains both .blend, .stl and baseless (B-).stl files for the Prime, and A - E variants. Use .Blend files to customise the pose or the base file to make a custom variant.
The Prime and E share the same chassis.

I use a resin printer so I do not know how well it will work if a filament printer is used, but always make sure parts are supported. For resin printing, a lift height of 8mm above a platform allows for full drainage out of the hexbase.

You can request if you want me to make a specific miniature (although there is no timeline on when it will be completed), or support at the second tier or higher on the Patreon for a custom design.

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++