字符串艺术之旅

String Art Tracks

2023-07-23 11:59:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These rails can be used to make string art. They can be screwed into a wooden base, and then you loop yarn through the holes to make your artwork. You can print out a little needle as well, to help thread yarn through the holes.

The photo shows a very quick sample string art which I dashed off as a demo, along with some rails and needles. One of the rails in the photo is an early version that cannot be made in the customizable OpenSCAD file I have uploaded, but the changes are minor.

I designed this for use in art and craft projects at an aged care facility and it worked well for that. But I also have ideas to make it better for use in this setting. A new customizable thing entirely will arrive in due course which has a number of advantages over this design. But this one did work.

Due to some oddities in the customizer, the view of a curved rail is tiny, and I don't think you can zoom in.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
10%
Filament brand:
DCycle recyled filament
Filament color:
grey
Filament material:
PLA
Notes:
Printer is ender 3 v2 neo

Post-Printing

Print out straight or curved rails, and attach to a wooden base using the two screw holes at the end of the rails. Then thread yarn through to make your art work.

This thing is about to go through a complete redesign to make it easier and more interesting to use. Revision will arrive eventually, as a completely new customizable thing.