Poppenheimer爆米花桶

Poppenheimer Popcorn Bucket

2023-07-24 17:40:42

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I got duped by the photoshopped "promotional Oppenheimer popcorn tub" advertisement floating around the internet. It wasn't real, so I made my own.

I found Bussy McBussface's Fatboy model
https://www.thingiverse.com/thing:5378257

And it was perfect. He spent a lot of time making a well-built model. I used MeshMixer and sliced off the top so there wasn't any overhang, and hollowed it out so you don't need to adjust any settings (such as using vase mode or whatever).

At current settings, this STL is 100mm x 100mm, and 135mm tall. You should be able to make it larger if you want more popcorn, but these settings took around 27 hours on my Ender 3V2 Neo. No supports or adhesion needed, and just a little bit of clean up after the fact. I had some light stringing.

I printed in matte ash grey, and then dry brushed some silver on it, but it looks good and ready to go without any paint.

Unless you have food-grade PLA, please be cautious eating out of any 3D print. I lined the inside with wax paper, so the popcorn never touched the PLA, and it would also be easy to clean it out for display later.

Have fun! Enjoy Christopher Nolan's Oppenheimer, with the "Poppenheimer" Popcorn bucket