自动浇水花盆盖
Self-Watering Planter Lid
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a Lid for the Self-Watering Planter (Small) by parallelgoods.
It creates a Glasshouse effect, so your Seeds will not Dry from the Sun.
Make sure to lift it up for at least 15 minutes two times per day to avoid mold. While you lift it up do not open the windows and dont let the sun shine direct to the Seeds!
You will need the Planter for this Lid:
https://www.thingiverse.com/thing:903411
Do not forget to use Transparent Filament!
Print Settings
- Printer brand:
Flsun
- Printer:
Flsun V400
- Rafts:Doesn't Matter
- Supports:No
- Resolution:0.25
- Infill:15%
- Filament brand:
R3D
- Filament color:
Transparent
- Filament material:
PLA
- Notes:
Make Sure the "Bottom" is only two Layered! Otherwise the Light can not shine through well!
There are two versions, both for 0.4 Nozzles. Two Walls and One Wall. For me the One Wall version works really good!
Tags
License
Self-Watering Planter Lid
by Spidey-Prince is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license.
相关内容
猜你喜欢
联系我们
热门推荐
-
压缩袋真空适配器2023-03-27 -
Raspberry Pi外壳2023-03-27 -
WaS_UK_N-class_destroyer2023-05-17 -
老板螃蟹 KGC-0102023-09-08 -
Smallrig F40 跟踪焦点齿轮2024-04-23
最热下载
-
车身RC 1/10 全套2023-03-26 -
佳能EOS镜头连接接口2024-01-11 -
Ikea 米兹顿 插嵌2024-04-20
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
网眼透风拖凉鞋赤足鞋凉鞋2025-07-18 -
艺术雕像（女性）2025-07-16 -
大码动漫女战士2025-07-15 -
原神优菈2025-06-27