天线式结构用于分离Tundra小棒
Antenna-like to separate Tundra Dongles
2023-07-24 17:42:23
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I got a lot of drag or drift while using my FBT (Tundra) in VRChat previously.
This is my solution to :
- have dongles more in-sight
- have dongles always facing up and not tilted (Tundra Labs logo facing upward as documented)
- have dongles enough separated to reduce near-field interferences. At 2.4Ghz wave length is about 12.5cm and it is recommend to separate antenna by at least one wave length (reference)
I'm not a radio expert but it works way better now thanks to that.
Use :
- M5 washer (DIN 125 x M5) x8
- M5 nut (DIN 934 x M5) x8
- M5 screw (DIN 912 M5 x 16) x8
- low cost webcam support suspension boom, for example at Amazon
Don't hesitate to give suggestions or tip if you like it :)
License
CC BY
Antenna-like to separate Tundra Dongles
by nittch is licensed under the Creative Commons - Attribution license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
艾米·黄曲奇切割工具2023-03-26 -
角色扮演圆柱滚动轴2023-03-26 -
迷你旋转式杯子 - 亚马逊电机定制款2023-06-18 -
藏身载具：VKB战斗者装备2024-03-18 -
乒乓球无气2024-04-22
最热下载
-
吸血鬼之夜2024-01-15 -
伊瑟宁加德骰子塔（奥斯坦克）2025-07-16 -
Wolf系列手机支架2025-07-16 -
Ubiquiti UniFi AC Pro 无线接入点支架2024-04-21 -
沙箱建筑模型2024-05-08
最新模型
-
50公斤重量传感器支架2024-05-08 -
Mk2 一战菠萝手榴弹（改进版）2024-05-08 -
耐克标志与玫瑰设计2024-05-08 -
两件式灯具2024-05-06
