大型轨道支撑结构 - 用于Celestron 8SE系列配件

Zapata de rail GRANDE para accesorios Celestron 8SE

2024-01-08 16:17:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Basado en https://www.thingiverse.com/philjimg/designs (¡GRACIAS!)

Se ha alargado la longitud para tener mayor base en accesorios largos.

Se han rotado los agujeros destinados a las tuercas M3 destinadas a sujetar el accesorio, con ello se elimina la necesidad de los soportes en impresiones verticales.

Se han duplicado dichos orificios para mayor sujeción.

(translated by Google Translate, sorry)

Based on https://www.thingiverse.com/philjimg/designs (THANKS!)

The length has been lengthened to have a greater base on long accessories.

The holes for the M3 nuts intended to hold the accessory have been rotated, thereby eliminating the need for supports in vertical prints.

These holes have been doubled for greater support.

Print Settings

Printer brand:
Anycubic
Printer:
i3 Mega
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.14
Infill:
65%
Filament brand:
Amazon
Filament color:
No importa/Doesn't matter
Filament material:
PETG
Notes:
Aproximadamente, son 3 horas 40 minutos a 60 mm/s.
Es posible que sea más robusto con material ABS, lamentablemente, no dispongo ahora de dicho material
Imprimir en vertical (última imagen) para mayor robustez y para no necesitar soportes/
Approximately, it is 3 hours 40 minutes at 60 mm/s.
It is possible that it would be more robust with ABS material, unfortunately, I do not have this material now.
Print vertically (last image) for greater sturdiness and to not need supports