怪兽猎手棋盘上的力量计数板

Monster Hunter Board Game - Stamina Board

2023-05-12 17:05:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is the Stamina Board in 3D for Printer with 20 cm x 20 cm

To snap them together you need 3x3mm Neodym magnets for the Holes on their sides.

If you want to have the symbols in the top and bottom parts you have to copy your original
Stamina Boards and then cut and glue it in the slots :)

I recommend to airbrush the arrow in the middle
You can use masking tape to protect the rest of the board from the spray

EDIT:
I Upload the symbols to glue it in the slots left and right bottom.
The other slots you can copy and cut from the original boards.

Print Settings

Printer brand:
Anycubic
Printer:
i3 Mega
Rafts:
No
Supports:
No
Resolution:
0.3
Filament brand:
3D Jake
Filament material:
PLA
Notes:
You can print it without Supports

i printed it with a 0.6 nozzle and layer 0.3 in ~4 hours per side.

Edit:
Now here are 2 versions
one without support
and one where you need Support because there are now card slots for the equipment to slide the cards ~50% under the board to save space.

Post-Printing

Tags

License

CC BY

Monster Hunter Boardgame - Stamina Board 2 versions
by Extermiknuter is licensed under the Creative Commons - Attribution license.

怪兽猎手棋盘上的力量计数板

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

地心版怪兽型6x18针孔Gamera
2023-03-27
2023年度EDC手镯饰品
2023-05-10
藏身载具：VKB战斗者装备
2024-03-18
Mulita 教育机器人 2.0
2024-03-25
Lian Li O11 Vision LCD Holder Sensor Panel
2024-04-07

最热下载

最新模型