Ubiquiti UniFi G4 门铃专业适配器（支持68mm开关盒）
UniFi G4 Doorbell Pro Adapter for 68mm switch box
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
An adapter to mount the UniFi Goorbell G4 Pro on a 68mm electrical wall outlet box With mounting bracket included in delivery.
You need 1x M3 insert nut,
1x M3x16mm countersunk screw with matching washer,
If there are no switch box screws in the switch box you need 1x standard switch box screw.
Print Settings
- Printer brand:
Mingda
- Printer:
Mingda Magician X
- Rafts:No
- Supports:No
- Resolution:0,16 - 0,2
- Infill:10%
- Filament brand:
extrudr
- Filament color:
black
- Filament material:
ASA
Post-Printing
Installation instructions
*) Melt in the insert nut M3
1) First screw the printed adapter with a standard switch box screw.
2) Fasten the angle adapter of the UniFi Doorbell with a M3 countersunk screw and matching washer.
3) Tighten with one of the screws supplied with the UniFi Doorbell.
License
UniFi G4 Doorbell Pro Adapter for 68mm switch box
by schwaboss is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
猜你喜欢
联系我们
最新模型
-
D型接口适配器2024-05-08 -
Zyn/Chino容器罐2024-05-06 -
比尔泰马维夫特2024-05-06 -
汤马霍克 ASG32 4.44米 42毫米鼻部切割模板2024-05-06 -
4" Duct to Flat Surface2024-05-06
最热下载
-
苹果 HomePod mini壁挂装饰2024-03-19 -
Articulated Snake2024-03-30 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14 -
史诗级生存刀具2024-05-03
