CROW & BIRD REPELLENT FOR BALCONY RAILINGS

2023-07-24 18:59:46

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

CROW & BIRD REPELLENT FOR BALCONY RAILINGS

Summary

CROW & BIRD REPELLENT FOR BALCONY RAILINGS

Here is a simple solution to get rid of crows and other birds which perch on your balcony railings and wake you up early in the morning with their noisy voices or dirty your balcony with their droppings. With these clamps, I ensure you that they cannot land on your balcony railings any more :)
• Easy to print
• Simple to mount/unmount
• Environmental friendly
• Minimum visual pollution
• Easy to clean

There are two kinds of clamps: quadrangular and rounded.
• Quadrangular clamp is standard and fits your quadrangular railings with a height between 2-3cm and a width between 3-4cm.
• I have designed 7 rounded clamps for different diameter sizes between 3cm to 6cm for rounded railings.

You can "uniform scale" the whole parts at any slicer or CAD program for other railing sizes.

Bolt is standard and designed to fit every clamp quadrangular or rounded (for every size).

Mounting:
Just print 4 pieces of each clamp and 4 corresponding bolts and mount them at the beginning and ending edges of the railings and 2 for each corner. Stretch the fishing line (#) between them using the holes on the clamp sticks and that's all. You can use one fishing line and pass it through the holes of the clamps beginning from the top holes and reaching to the bottom; moving down step by step at each turn (see the pictures).
(#) Instead of fishing line, you can also use thin wire or similiar material yarns, thread, string etc. strong enough against weather conditions and corruption.

Printing Instructions:
• Clamps and bolts can be printed with 0.28mm layer height without any support.
• Infill for clamps is >=20% and for bolt >=80%.
• Printing materials are PETG or ABS. DO NOT USE PLA, as the sticks may melt in hot weather.
• After print, lubricate the bolts with dry soap for easy screwing.

Happy printings :)
Botcan3D

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.28mm
Infill:
Higher Better >=20%
Filament brand:
Local
Filament color:
Any Color
Filament material:
PETG or ABS
Notes:
Bolts should be printed >=80% infill
Do not use PLA as it may melt in hot weather