Crow乌鸦造型服装头部模型

Crow fursuit head

2023-09-10 04:35:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The original head was too big for my printer so I broke it into three main pieces. I have printed this and it prints great and glues back together well. It's the same size as the original which does fit my head (~22in/56cm circumference, fits slightly tight on me which I personally prefer but keep this in mind if you plan to resize). This is cut to fit my Ender 3 Pro which has a 220x220x250mm bed. I hope this helps everyone else wanting to make this print!

Print Settings

Printer:
Ender 3 pro
Rafts:
Yes
Supports:
Yes
Resolution:
0.2mm
Infill:
10%
Filament brand:
Amazon brand
Filament color:
White
Filament material:
PLA
Notes:
Used a brim and tree supports to print, each piece will need supports. Bottom jaw is not in these files since it fit on my printer in an upright position with supports.

Post-Printing

How I put it together

I sanded the parts where each would attach to make sure there would be a flat surface with abrasions for the gorilla glue I used to put the pieces together. I also paper macheted over the top to make sure the pieces wouldn't come apart and to give the head a rounder look overall.