bticino 350010 适配器

bticino 350010 adapter for Amazon Ring Video Doorbell 2

2023-07-24 19:52:54

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

this is an adapter I've designed to install a Ring Video Doorbell 2 in place of a bticino one.
it fits in the bticino 350010 box allowing you to use the original screw that held the old bticino intercom.
to mount the Ring backplate I've used 4 M3x20 screws (M3x10 whould be ideal but I only had the longer ones) and 4 hex nuts, 5mm that fit the 3D printed holders.
you have to push the nuts a bit hard, it's a tight fit.
the picture from behind is from the prototype, that's why it looks different from the STL file.

P.S.
remember to install a 25Ohm, 50W resistor if you plan to use the 12VAC bticino PSU that powers the the electric lock, if you don't have an AC ringer you need it per Ring instructions.