Behringer Crave EURORACK立架套件
Behringer Crave eurorack stand case
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a 60hp eurorack case built together with a Behringer Crave stand.
Probably good for Edge and Splice as well, but never tested.
You can use it with a eurorack power module like the Behringer CP1 or you can find in the files two MMI_powered versions(the case and the left side panel), which are designed for the MMI USB eurorack PSU.
https://www.mmimodular.com/modules/usb-power/
You will also need the following items:
- M3x10 6pcs M3x20 6pcs screws(I am not sure about the length, it was a long time ago, sorry)
- 8 pcs of M3 x 5,7 mm threaded inserts
- 20 pcs(or more) M3 square nuts
- a 90° DC adapter 5,5 x 2,1 mm - 5,8 x 2 mm(for the Crave)
- a 90° USB B cable or adapter(if you use USB MIDI)
I printed from Extrudr Green-TEC Pro Carbon(0,6mm nozzle, 0,25mm layer height)
If you use it please send me a picture of it(and your gear of course) in the comments, thanks!
License
Behringer Crave eurorack stand case
by siposattilaaa is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
LDRC Drift Extended Axle with Spacer2024-03-21
-
冒险者 5米屏幕垂直背板2024-03-21 -
Skytrak保护壳2024-03-25 -
Woovebox 案例2024-03-26 -
阿特雷德家族书签——沙丘2024-04-30
最热下载
-
Quansheng UVK6 桌面支架2024-01-10 -
Makergear M3 M2喷嘴标签2024-03-27 -
罗宾：不公正22024-04-07 -
比基尼模型2025-07-16
最新模型
-
3D Pokemon 卡牌盒2024-05-08 -
团队精神骷髅标志展示架2024-05-08 -
铁匠铺 HO 比例 3D 模型2024-05-08 -
装饰艺术风格灯罩适用于GRÖNÖ灯2号2024-05-06 -
漫步者 R1000T4 3D模型2024-05-06