空气动力学风门管道适配器
air venturi barrel adapter
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
this adapter centers the barrel and allows for 1/2 x 20 moderator (see mine) to be attached for a very quiet air rifle.
Print Settings
- Printer brand:
Creality
- Printer:
CR10S PRO
- Rafts:No
- Supports:Yes
- Resolution:0.2
- Infill:50%
- Filament brand:
esun
- Filament color:
black
- Filament material:
pla+
- Notes:
Print vertical on threaded end with support enabled "from the bed". I use cura.
This replaces the end cap on the shroud. Place into shroud, sliding end over the barrel and screw into shroud finger tight.
Post-Printing
IMPORTANT!!!
before use, make sure there is no stringing in the path of the pellet. I designed this for .22 cal, it may work for .25 the hole is 7.4 mm.
How I Designed This
finally
a lot of measuring and trial and error - mostly error (2 years worth)
Tags
License
Air Venturi Avenger adapter
by tomcat0987 is licensed under the Creative Commons - Attribution license.
相关内容
猜你喜欢
联系我们
热门推荐
-
DJI Mavic Pro 克隆版2023-03-26 -
Mobula 6盒3D模型2024-01-17 -
Zojirushi 米饭煮锅露水收集装置2024-03-21 -
Playmobil 保时捷警察卡车挂钩2024-04-03 -
TreX 450抗转动模型 + Matek G474旋翼箱体（旋翼飞行）2024-04-30
最热下载
-
螺旋齿轮玩具3D模型2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
尼克公司仿生假手指V3.5.5版2023-03-26 -
Dado - 立方体模型2024-03-24 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17 -
用于HGX Lite的MBOT3D MK2混音版2025-07-18 -
天使和恶魔2025-07-16 -
兔女郎半身像2025-07-15
