FingerTech Robotics Viper Baseplate R7.1 Plastic

2023-07-25 07:45:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

FingerTech Robotics Viper Baseplate R7.1 Plastic

Summary

Did your aluminum Viper baseplate get wrecked in the last tournament? Print your own replacement! FingerTech Robotics has designed this plastic version to be strong enough to enter into combat, and has flat sides for adding extra armor if you want to really beef up its defense.

There are slots for inserting ten 6-32 nuts, which will accept the kit's screws and fasten the front and top armor.
One new feature we are excited about is the drive motor cartridge. Each motor slides into its cartridge then snaps into the baseplate. For workshops and light combat, you don't even need to use the tiny 2-56 screws that normally face-mount the motors, reducing difficulty and speeding up assembly!

The license allows you to print your own, but not sell this version or remixes of it.

Print Settings

Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
5%
Filament brand:
Overture
Filament color:
Any
Filament material:
PLA
Notes:
Supports are ONLY needed directly under and over the two floating triangles. Everything else will bridge nicely by design. (Works on i3 MK3S, confirm on your own layers.)