停止动作装置与风车适配器，用于动作人偶和机械架构

Stop Motion Rig + Winder Adapters for Action Figures and Armatures

2023-07-25 17:54:40

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

-- Stop Motion Rig + Winder Adapters for Action Figures/Armatures --

I developed these adapters to work with stop motion rigs and winders. The ball joint connector is 6mm and should work with all 6mm setups.

The Flat and Curved Rectangle adapters can be paired with putty, double stick mounting tape, Velcro adhesive tape, glue/epoxy and more!

The L Adapter is designed to keep more of the adapter in your shots and less of your rig/winder. Works great for subjects facing towards the camera! This model can also be used with can be paired with putty, double stick mounting tape, Velcro adhesive tape, glue/epoxy and more!

The Screw adapters feature start holes to assist in marking and drilling holes in your figures. One screw is usually effective but I've provided two slots if needed. This mount may also be paired with an adhesive of your choice.

The Arm extensions are 60mm and 90mm in length.

I recommend printing ALL pieces at 100% infill to optimize the strength and durability of the adapters. You can print with PETG for the strongest material but they also work with PLA.

The Curved Rectangle Adapter and Rig Arm Extensions will require supports placed on the build plate. No supports needed for the Flat Rectangle, L or Screw Adapters.

If you have any suggestions for additional adapters or remixes, please feel free to reach out.

NON-COMMERCIAL LICENSE WITH NO RESELL OPTION!

Enjoy and MTFBWY!