服务器电源模块

Server power supply mod

2023-07-25 17:55:42

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a front connector panel for server power supplies.
It has 4 v 5V USB sockets,3 x 12V Power Pole connectors and 1 x 12V spring terminal connectors.
See http://www.sadarc.org/xenforo/upload/index.php?threads/server-powersupply-mod.235/page-2 for more info. Post #33....
The R2Z-6400R-P unit is rated at 12V 28Amps so is quite suitable for Ham radio use.
There are others that have the same form factor too.
The cover I used is a length of 100 x 50mm PVC down pipe.

The spacer is used at the back of the pipe has a gap for ventilation.
I've run the 12V fans on the 5V supply to keep the noise down and that is ok as the power supply generally is not run at full load for long periods.
Eventually, I will have a go at upping the 12V to 13.8V.

The Power Pole connectors are held in with a length of 1.75mm filament.