1Up 车轮固定装置

1Up Wheel Chock

2023-07-25 18:06:46

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a wheel chock to mount to a 1up bike rack to help stabilize the front tire and center the bike on the rack. It is made to use 2 M6 bolts to hold it to the tray. The holes are 2.5" apart. I put the wheel chock in the desired position and used a center punch to mark the holes on the tray. I then drilled and tapped the two center marks to M6x1.0.

One design change that would make this better is to have the tray be a through hole and thread the screws into the wheel chock. This would prevent water from pooling in the holes of the wheel chock and in the bolt head.

Print Settings

Printer brand:
Raise3D
Printer:
Pro2+
Rafts:
No
Supports:
No
Infill:
20

License

CC BY

1Up Wheel Chock
by 4iFox is licensed under the Creative Commons - Attribution license.

1Up 车轮固定装置

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

MK47 模组道具枪
2023-03-26
GPD Win3 把手型号
2023-04-07
SATA male THT 15-pin right-angle ATX power connector (3D files, f3d file, and KiCad files included)
2023-08-02
盐湖插入整理器
2024-04-13
GTA 5 大地图模型
2024-04-21

最新模型