Storz & Bickel 烟草胶囊填充装置 Mark 2

Storz & Bickel Vape Capsule Filler Mark 2

2023-07-25 20:21:33

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I have just upgraded the Filler Base slightly (Filler Base mark 3). I made the centre post a few mil. taller and rounded it off so it is now easier to put the two pieces together.

This is a guide designed to help you fill the Storz & Bickel dosing capsules that come with their Mighty Vape.

Files included:

Top piece
Filler Base
Tapper
Capsule reshaper

The Capsule Reshaper is included for when the delicate capsules or their lids get squashed. Just force them onto the appropriate end of the reshaper, push it down onto a solid surface, and it should be round and flat again. Carefully remove and use.

The Tapper should slide onto the handle of the small brush included with the Vape. It should be snug enough to not fall off, but easily enough to pull back off if needed.

Step 1 - Load 8 empty capsules into the base.

Step 2 - Align the top with the guide in the middle and rest it onto the capsules, bowl up.

Step 3 - Use the brush and tapper to brush herb into the capsules, tapping them down. Repeat as needed. Note: I find having a pair of tweezers is handy to help disperse the herb as well as for picking up the capsules and their lids.

Step 4 - Remove the top (bowl) and put the lids on the 8 capsules.

Step 5 - Inver the top (bowl) and align with the middle piece, then push down to secure the lid in place so the capsules don't fall out.

Printed on a Pruse Mk3 printer, standard PLA with 0.25mm height. I used a standard 0.2mm gap between connecting parts.