Orange Pi Zero 3 快件盒
Orange Pi Zero 3 Snap Case
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a slim case that requires no screws for assembly. In fact, the clips on my printed version were so tight that I believe they are 'forever'.
Added some vents for heat, and I routed my antenna cable between the RJ-45 and USB ports. Wouldn't be difficult to disconnect the antenna and push it through a vent if desired.
Printing requires no supports, just place the flat side of each half on the print bed. To assembly, carefully guide the 4 clips to their slots.
Update 08-23-2023 - added a version of the case top with a 16x16mm heatsink opening
Print Settings
- Printer brand:
Anycubic
- Printer:
Kobra
- Rafts:No
- Supports:No
- Resolution:0.2
- Infill:10
- Filament brand:
Generic
- Filament color:
Any
- Filament material:
PLA
- Notes:
Print flat faces down. No Supports needed.
Tags
License
Orange Pi Zero 3 Snap Case
by sclebo05 is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
叫我可爱吧（带刀的鸭子卡通）2023-03-26 -
声学吉他调音钩 3D模型2023-04-23 -
Lithophane Pat Rouille2023-05-01 -
经典版 Omnitrix V22023-05-15 -
100mm至58mm吸尘管接头2023-08-04
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
GMX曲线支架支持GoPro安装（或轻型结构）2023-05-22 -
Dado - 立方体模型2024-03-24 -
GLOCK 17（第三代）蓝枪2024-04-13 -
GTA 5 大地图模型2024-04-21
最新模型
-
丰田22RE发动机Starer电机2025-08-08 -
龙珠孙悟空，无需支撑2025-07-19 -
戴森V6真空吸尘器配件壁挂支架2025-07-17 -
KALYRA PRIME - 一姐 适合桌面游戏和收藏家的科幻女英雄。2025-07-15 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24