紧凑型伺服控制器箱

Servo Controller Compact Case

2023-07-26 01:06:35

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I wanted to tidy up my servo controllers so I knocked this up in Fusion 360, one of those silly jobs that took waaaaay too long as I wanted the fit to be perfect, after a few prints/tweaks I'm happy with this and thought I would share.

It's designed to be printed with the flat parts to the base of your slicer so you may have to rotate it accordingly, print on bed with no raised Z height, no supports or rafts required.

I've kept the height as low as possible for quick printing, I also added chamfers so you can scrape them off the build plate easier.

I bought the Servo Controller from Ali:
https://www.aliexpress.com/item/1005005094822088.html
Nice and cheap, each one will control 2 x Servo's but rotate the same axis, for the price I bought a few and use 1 per servo.

It is a press fit and goes together snugly without the need for brittle clips, I added pegs into the base so you can use just the base if you prefer, I have revised the model to be a better fit than I printed.

Hopefully you might find it as useful as I did.