双模块控制器（PS5）和桌下耳机座

Dualsense controller (PS5) and Headphone mount (under desk)

2023-07-26 03:07:50

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I made this under-desk mount for the Playstation 5 Dualsense Controller and a pair of Headphones based on the Controller Interface by CarlTheCreator. I did not screw it into the table, double-sided tape was enough to hold it securely. It's been hanging there for a while without falling down so it seems secure enough. However, if you do want to screw it in you can either adapt the model in Fusion 360 or just drill through the print

If you like the design, then of course feel free to leave a tip but make sure to also tip CarlTheCreator since he provided the original interface and 3d scan of the Dualsense.

Fun Printing everyone!!