Cup Mat for Gaggia Classic Pro

2023-07-26 03:34:37

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Simple cup mat that fits on top of a Gaggia Classic Pro (and may also fit the older Gaggia Classic). Prevents the stainless steel top from getting scratched and if you print in flexible filament can be used as an anti-slip mat.

Disclaimer

Please note that this is not an approved part and you print and use at your own risk. In normal use the surface does not seem to get very hot, but please make sure you are satisfied that there is not a safety issue.

Print Settings

Printer brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
N/A
Filament brand:
Generic
Filament color:
Black
Filament material:
PLA
Notes:
Not fussy about filament type. I use standard black PLA because I like the look of it. There is a small ridge just inside the machine front edge that holds off the mat from sitting completely flat. The small amount of heat generated by the machine causes it to sag just enough to sit nicely. Have not tried black TPU but would probably work very well.