AeroCool GT-S 3D模型支持GPU

GPU Support for Aerocool GT-S

2023-07-26 04:01:14

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I made this support after a few nightmare nights about my GPU (ROG RTX 3080) warping everything.

It is custom made for Aerocool GT-S case, which I couldn't use the base of the case for these pillar stands because I have a fan there, so why not use these HDD/SSD slots to make the stand?

I was in a hurry, I printed the 0.2.0 version for model validation and then made the 0.3.0 with a few millimeters extra on the Z (I think it's 1mm or 2mm) for a tighter fit in those spaces (but it wasn't really necessary, just my toc)

Made with ABS to not have deformation problems when at high temperatures

I left a screen print of how I aligned the model with some information about this print.

PS: As it is my first model, it is very simple and the design was inspired by a screwdriver that fit perfectly in the first measurements.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.28
Infill:
10%
Filament brand:
eSUN
Filament color:
Black
Filament material:
ABS
Notes:
It's designed to fit neatly into the SSD's vent spaces, haven't tried it, but seems to have no problem scaling Y up/down for a better fit.

It took 1h and 9 minutes of printing at 50mm/s on the infill and 25mm/s on the walls (default setting by the curator) - 10g and 3.85m of filament used (estimated by the curator).

Special settings before printing:
- I used Cura as my main slicer and enabled a 'cutting tolerance' option with the value 'Exclusive', just to be sure of the final dimensions of the object.