刚性篱笆式背带织布机

Rigid Heddle Backstrap Loom

2023-07-27 00:57:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a small, highly portable rigid heddle backstrap loom. Your first project can be a new backstrap, and you can use paracord, USB cable, shoelaces, or whatever you want to stand in until you have your newly woven strap.

You'll need a backstrap, an anchor strap, and yarn to use it. I've been using carabiners and paracord while I weave my new strap.

The different heddles support 19, 21, or 23 warp threads and work nicely to make straps and narrow bands. Look on YouTube for instructions on using a backstrap loom (there are a few types).

UPDATE: I've added a clamp to hold your work near your body so that you don't have to tie your woven strap in a knot to hold it. You'll need M3 x 20mm thumb screws (affiliate link: https://amzn.to/43Y8JGS) and two low-profile M4 heat-set inserts (affiliate link: https://amzn.to/3KrYzaN) to complete it. Print it in ABS (or at least PETG) to withstand the heat of melting in the inserts, and give it an extra wall for strength (3 walls will work).

I've also added a blunt version of the batten to increase the chances of getting it through airport security. The original one is rather weapon-like.

Print Settings

Printer:
Bambu Lab X1C
Rafts:
No
Supports:
No
Resolution:
0.12 for heddle, 0.2 for batten and clamp
Infill:
15% rectilinear for heddle, 20% rectilinear for batten
Filament brand:
Doesn't Matter
Filament color:
Green
Filament material:
PLA for batten and heddle, ABS for clamp
Notes:
More strength is needed for the batten than for the heddle. If you want to print the batten at a coarser layer height, you'll likely need to sand the leading edge smooth.